Natural Stone Tile Detail
Natural stone is one of the most commonly used materials in countertops. Natural stone or dimension stone slabs (e.g. granite) are shaped using cutting and finishing equipment in the shop of the fabricator. The edges are commonly put on by hand-held routers, grinders, or CNC equipment. If the stone has a highly variegated pattern, the stone may be laid out in final position in the shop for the customer's inspection, or the stone slabs may be selected by experienced inspectors.
Then the countertop assembly is installed on the job site by professionals. Commonly, initial countertop fabrication takes place at or near the quarry of origin, with blocks being sawn to thickness and then machined into standard widths (600mm and upwards), before being surface polished and edged. This method removes the need to ship waste material, and reduces the time needed to prepare client orders. A wide range of details may be pre-machined by the fabricator, allowing for installation of different sinks and cooker designs.[3] A common drawback to natural stone is the need for sealing to prevent harboring of bacteria and/or fluids that may cause staining.
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural Stone Tile
Natural stone is one of the most commonly used materials in countertops. Natural stone or dimension stone slabs (e.g. granite) are shaped using cutting and finishing equipment in the shop of the fabricator. The edges are commonly put on by hand-held routers, grinders, or CNC equipment. If the stone has a highly variegated pattern, the stone may be laid out in final position in the shop for the customer's inspection, or the stone slabs may be selected by experienced inspectors.
Then the countertop assembly is installed on the job site by professionals. Commonly, initial countertop fabrication takes place at or near the quarry of origin, with blocks being sawn to thickness and then machined into standard widths (600mm and upwards), before being surface polished and edged. This method removes the need to ship waste material, and reduces the time needed to prepare client orders. A wide range of details may be pre-machined by the fabricator, allowing for installation of different sinks and cooker designs.[3] A common drawback to natural stone is the need for sealing to prevent harboring of bacteria and/or fluids that may cause staining.
Natural Stone Tile
No comments:
Post a Comment